Mr. Jiang found us through the Alibaba platform, saying that there are now a number of brush strip for sliding doors. When assembling aluminum profiles, there is a problem of the slots. It turns out that Mr. Jiang's customers have special requirements on the thickness of the brush. Because the brush is too thick, the glue ribbon will be inserted into the card slot during assembly, resulting in bristles and forks, which cannot be assembled. Under the premise that the thickness of the filament can not be changed, it is necessary to ensure smooth assembly. Mr. Jiang sent us 10 sets of brush strip for sliding doors. He hopes we can help.
Mr. Jiang's customers have increased the thickness requirement for the brush strip for sliding doors. It is hoped that the brush will not loosen or fall off after assembly. Therefore, the width of the opposite brush and the height of the side are just adapted to the aluminum profile, which gives Assembly brings a certain degree of difficulty. However, for the professional production of the screen door seal brush, in order to avoid the problem of the slot, which leads to the problem of oblique filament, we will use the boring tool to match the aluminum The corners at both ends of the assembly of the profile are blunt, so that the filament can be prevented from entering the slot during assembly, which affects the assembly. On the same day, we sent back 10 sets of brush strip for sliding doors to Mr. Jiang.
The next day, I received a call from Mr. Jiang, saying that the customer was very satisfied with the effect of our assembled brush strip for sliding doors. He said that the AOQUN is really a professional quality cooperation manufacturer, and they have placed 1000 sets.
escanear a wechat
escanear a wechat