The first is to check whether the strip brush has large cracks or breaks. If the strip brush is broken or has large cracks, it can be repaired with adhesive. In particular, the use of special adhesives for sealing strip brushes can easily repair large cracks. Of course, if the sealing strip brush is seriously damaged, or the degree of aging is relatively large, it is best to replace the new sealing strip brush to save trouble. It is not difficult to replace the sealing strip brush, but if you want to do it better, it is best to ask a professional to do it.

Weather Strip Brushes

The daily maintenance work of the strip brush mainly includes the following items. The first is to use car detergent for cleaning. After cleaning, apply a layer of high-permeability protective agent to prevent the strip brush from aging. In addition, the gaps of the sealing strip brushes are easily filled with sand and dust, which can cause rust. For this purpose, dust, etc., should be removed with a brush.

The sealing strip brush is not very conspicuous in your home, but it is the cornerstone of stability. It is a powerful measure to ensure the airtightness, water tightness, and sound insulation of doors and windows. At the same time, it is also a reliable guarantee for the safe existence of glass after external forces in the doors and windows. Because the weather strip brush is affected by climate and sunlight, it will shrink, age, and deform. Therefore, the weather strip brush is not allowed to work in a stretched state and should be kept in its free state. In order to hold the glass tightly, the sealing strip brush is often pulled too tightly during the installation process, which cannot guarantee the free state, so that it is in a stretched and deformed state. The practice has proved that due to the installation of the sealing strip brush in the state of tensile deformation, the sealing strip brush has fallen off, broken, and cracked. For this reason, when installing, the length of the strip brush is longer than the assembly side of the door and window, and the inclined plane is broken at the corner, and the adhesive is used to stick it firmly, leaving enough expansion and contraction allowance.