Do you know the standard of a good air guard brush cable grommet? Let me tell you the good standards in the brush industry!
1. The installation should be simple. We all know that the air guard brush cable grommet is installed in multiple locations on the raised floor. A small machine room may use several air guard brush cable grommet, and the diameter is usually not too large, so the installation needs to be convenient and at the same time Does not affect the use effect.
2. Accurate tolerance. The production is strictly in accordance with the standard. After installation, there is no obvious virtual looseness, no automatic sliding out, and no protruding installation notch due to the excessively long brush end, which has achieved a good assembly effect.
3. Use pure nylon wool yarn. Nylon's unique wear resistance and resilience are the reasons for choosing nylon material. An important function of the air guard brush cable grommet is to pass the cable. It can still maintain toughness and not deform during the long time of the cable insertion, without frequent replacement.
4. Good tensile strength and no hair loss. Take brush strips as an example. In the industry, the bottom width is ≥3mm, the tensile strength is ≥6kg; the bottom width is ≥4mm, the tensile strength is ≥10kg, and the interior of the cabinet can be kept clean and tightly sealed without linting. Not damaged.
5. Additional flame retardant function. Now some large companies require the flame retardant grade of the brush filament of air guard brush cable grommet to reach UL94-V0, otherwise they will not adopt it.
This is a good air guard brush cable grommet standard. Which of the above points can your product meet?
escanear a wechat
escanear a wechat